Conduit Math
Menu

Mark a three-point saddle

Locate the center and return marks without mixing methods.

Measure the obstruction

Enter the obstacle height and the distance from the pipe end to the obstacle center. Include the clearance your installation needs in the height.

Use the center-notch method

For Klein’s 45° center saddle, use 22.5° returns. Spacing is 2.5 times obstacle height. Add 3/16 inch of shrink per inch of height to the obstacle-center distance.

A worked layout

A 3-inch obstruction centered 20 inches from the end gives a center mark at 20 9/16 inches. The outer marks are 13 1/16 and 28 1/16 inches. Verify the manufacturer’s bending sequence and notch alignment.

When the obstruction is wide

A three-point saddle rises to one center peak. A four-point saddle provides a flat top; specify enough width for the obstruction and clearance. Its calculator uses ideal geometry.

Source · Klein Tools, Conduit Bender Guide, “Three Point Saddle Bend,” pp. 9–12.