Measure from center to center
For two conduits of equal outside diameter, center spacing equals the clear gap plus one outside diameter. Measure in the plane of the offsets. Set the angle to the angle of each individual bend.
Shift both marks on the adjacent conduit
At 3 inches between centers and a 30° bend angle, the stagger per adjacent run is 3 × tan(15°) = 0.804 inches, or 13/16 inch on the tape. Move both marks by that amount in the direction your layout calls for. Their distance from each other stays the same for equal rises and angles.
Measure a rack from one reference
For the third conduit in this equally spaced rack, the shift from the first is twice the unrounded stagger, about 1.608 inches (1 5/8 inches). For longer racks, multiply before rounding each mark to keep tape rounding from accumulating.